Small hole electric discharge machine
General-purpose, high-precision small-hole electric discharge machine
Holes from 30 μm to 8 mm can be drilled without breaking the blade in any material as long as it is an electrically conductive material.
・The ST300 is a high-precision small-hole electric discharge machine with the same design as the high-end model.
・It can be used for a wide range of applications, such as starting holes for wire cutting and processing precision parts.
・Furthermore, it is compatible with various system structures as a dedicated machine, has high insulation, and has little thermal displacement due to processing heat. We use a stone surface plate that maintains high precision for a long time.
ST300E
General-purpose machine for parts processing with the same mechanism as the NC machine
| table dimensions | 300 x 300 mm |
| X-axis (left and right) | 300 mm |
| Y-axis (back and forth) | 200 mm |
| W-axis (guide vertical) | 280 mm |
| Z-axis (electrode up/down) | 400 mm |
JT300II
Reasonable model ideal for wire-cut start holes
| table dimensions | 300 x 300 mm |
| X-axis (left and right) | 300 mm |
| Y-axis (back and forth) | 200 mm |
| W-axis (guide vertical) | 280 mm |
| Z-axis (electrode up/down) | 300 mm |
MT40LSII
Power supply and head only model. “The machine you no longer use will be reborn as a small hole electric discharge machine.”
| table dimensions | ー |
| X-axis (left and right) | ー |
| Y-axis (back and forth) | ー |
| W-axis (guide vertical) | 280 mm |
| Z-axis (electrode up/down) | 400 mm |
MT60LSII
Power supply and head only model. The long servo can handle deep holes.
| table dimensions | ー |
| X-axis (left and right) | ー |
| Y-axis (back and forth) | ー |
| W-axis (guide vertical) | 500 mm |
| Z-axis (electrode up/down) | 600 mm |